Advice of installation

Types of possible applications

Panels and Decorations of wall can be used by plusieures manners:

Use of ornemental Panels:

- For a sideboard of kitchen
- In your bathroom to re-dress a stone floor,
- Cover a whole wall or a space mattering in your lounge

Use of wall Decorations:

- To create an original effect on the walls of your kitchen,
- For a customisation discréte of your bathroom,
- To sign your walls, arrangement of decorations curls vertical, horizontal for a design effect.

Wall Decorations and Ornemental Panel METALdécor can beings Used on all support
Paint(Painting) smooths, in effect, wallpapers, stone floor etc. they are resistant in the humidity.
They must be however applied to a séche, appropriate(clean) and smooth surface.
For the cleaning, it is advised(recommended) to use a soft cloth(rag) and some methylated spirit.
No sense(direction) of pose(installation) is recommended, Panels and Decorations(Sets) will be applied In the sense(direction) of your choice.

Panels and Decorations of wall are realized aluminum 5/10th,
They are rather fine and in case of fall can deform.
The Adhesive of Decorations and Panels is is not repositionnable because of their material(subject), Otherwise,
They would not hold(like), neither in the time(weather) which passes, nor in the heat and in the humidity.

Unstick the plastic film of wall Decorations or Panels 

For a better membership(support), watch not to damage the adhesive part(party) in the back
Of the panel or the decoration(dust, finger mark, etc.).


Stick decorations on the wished surface and press on all the surface
For an optimal fixation(binding).

For certain particular cases, he can be necessary to cut panels

( At the End of wall, angle particular)

Plusieures options cut offer themselves to you:

- With shears of office(desk) for the consequent pose(installation) of important quantity and the lengthes
Attention to verify well the holding(dress) in the guillotine during the cut, he(it) is possible if the plate(patch)
Is not well held that it is a movement " the room(part,play) hunts(chases away,goes hunting) " and the cut will slant
( Thus indeed hold the room(part,play) during the cut).

- With shears with metals in sheet(leaf) or strip, with one
Shears cut everything or pass-sheet steel.
 Attention the cut has to be regularly made otherwise we shall have
Light occasions on the edge of the sheet steel which can ease by
Pressure but risk of not disappearing completely

- With scissors: use rather tapestry-maker's scissors
Or scissors softgrip or multicustom(multiusage) of length minimum 20 cms.
To take the same precautions as with a cut cuts through in hand
For the defects of border.

- With a cutter. Use a professional cutter (for more of facilitated)
Blade 18 mm in height. To use a rule(ruler) kicks out to maintain
The metal, (carry(wear) oven gloves).

Pass several times by exercising a constant pressure, then bend slightly;
Both pieces dissociates itself easily

Renovation of a bathroom